---
title: VirtualBox OVA Installation
slug: bhdo/virtualbox-ova-installation
createdAt: 2022-04-14T16:43:52.000Z
---

You can use Oracle VirtualBox to install Belden Horizon Data Operations using an OVA installation.

# Before You Begin

:::ExpandableHeading{isOpen="true"}
Review the VirtualBox Pre-Installation Checklist

- [ ] Prepare your environment for running virtualization. See [VirtualBox Documentation](https://www.virtualbox.org/wiki/Documentation) and [VirtualBox Downloads](https://www.virtualbox.org/wiki/Downloads) for more information.
- [ ] Install Oracle VirtualBox on your host environment.
- [ ] Set the correct system time on the host environment to prevent any license activation issues. UTC is recommended.
- [ ] The virtual machine will run on the same physical network card as the host environment. To ensure that the device can communicate with data sources such as PLC, DCS or CNC and can be accessed through the Web UI, make sure that communication can be established.
:::

- Verify your virtual machine can install Belden Horizon Data Operations. See [Verified VM Versions](https://public-docs.litmus.io/bhdo/verified-vm-versions).
- Adjust the system clock for the host environment prior to installing Belden Horizon Data Operations. The 15-day trial period may be rejected and invalidated by the license server if the system clock is not adjusted. If this happens, contact your Belden representative.
- Obtain a valid file in the OVA (Open Virtualization Alliance) format from Belden.&#x20;

To use Oracle VirtualBox to install Belden Horizon Data Operations using an OVA file, you will need to do the following.&#x20;

- Step 1: Create a Virtual Machine
- Step 2: Enable EFI
- Step 3: Configure Network Adapters
- Step 4: Log in to Belden Horizon Data Operations

To jump to a specific section, refer to the Table of Contents on the right side and click the corresponding step.&#x20;

# Step 1: Create Virtual Machine

You will first need to create the virtual machine that will run Belden Horizon Data Operations.&#x20;

**To create the virtual machine:**

1. Start the Oracle VirtualBox application.
2. From the *File&#x20;*&#x6D;enu, select the **Import Appliance** option.
   The *Appliance to import&#x20;*&#x64;ialog box appears.
3. Click the **Browse&#x20;**&#x69;con, navigate to the desired .ova file, click **Open**, and then click **Next**.
   The *Appliance settings dialog* box appears.
4. (Optional) From the *Appliance settings* dialog box, modify the default settings:
   - The name of the virtual machine.&#x20;
   - The number of CPU cores assigned to the virtual machine.
   - The amount of RAM assigned to the virtual machine.
   - The base folder where the configuration for this virtual machine is stored by Oracle VirtualBox.
5. Click **Import**.

The virtual machine is created along with the Belden Horizon Data Operations operating system.

The deployed virtual machine appears in the left pane of the Oracle VirtualBox application.

After you create the virtual machine, you must configure the network adapters.

See [VirtualBox only Showing 32-bit and no 64-bit Versions](https://public-docs.litmus.io/bhdo/troubleshooting-virtualbox-only-showing-32-bit-and-no-64-bit-versions) if you only see a 32-bit version when installing VirtualBox.

# Step 2: Enable EFI

After installing the virtual machine, you must enable the *EFI&#x20;*&#x6F;ption for VirtualBox deployment.&#x20;

**To enable EFI:**

1. From the open Oracle VirtualBox application, select the deployed virtual machine from the left pane, and then click the **Settings** icon in the right pane.
   The *Settings dialog* box appears.
2. Click **System** in the left pane.
   The *System dialog&#x20;*&#x62;ox appears.
3. From the *Motherboard&#x20;*&#x74;ab, select th&#x65;**&#x20;Enable EFI&#x20;**(**special OSes only**) check box from *Extended Features*.
4. Click **OK**.

# Step 3: Configure Network Adapters

You will now need to configure the network adapters for the VM.&#x20;

**To configure the network adapters:**

1. From the open Oracle VirtualBox application, select the deployed virtual machine from the left pane, and then click the **Settings** icon in the right pane.
   The *Settings dialog* box appears.
2. Click **Network** in the left pane.
   The *Network dialog* box appears.
3. Click the **Adapter 1** tab, and do the following:
   - Make sure the **Enable Network Adapter** check box is selected.&#x20;
   - From the *Attached to* drop-down list, select **Bridged Adapter**.
   - From the *Name&#x20;*&#x64;rop-down list, select **DisplayLink Network Adapter NCM**, and then click **OK**.
4. From th&#x65;*&#x20;Oracle VirtualBox&#x20;*&#x61;pplication, click **Start.**

The selected virtual machine starts up and the terminal window appears. The URL to be used in your browser appears in the terminal window.

# Step 4: Log in to Belden Horizon Data Operations

- See[Access the Belden Horizon Data Operations Web UI](https://public-docs.litmus.io/bhdo/access-the-belden-horizon-data-operations-web-ui) for details on logging in. &#x20;
- See [Access the Terminal User Interface](https://public-docs.litmus.io/bhdo/access-the-terminal-user-interface) for instructions on how to navigate and log in for the first time.

# Troubleshooting

If you don't see an option for a 64-bit version and only see a 32-bit version, refer to [Troubleshooting - VirtualBox only Showing 32-bit and no 64-bit Versions](https://public-docs.litmus.io/bhdo/troubleshooting-virtualbox-only-showing-32-bit-and-no-64-bit-versions).

