---
title: Virtual Machine Installation (VMWare Workstation Player)
slug: bhdm/virtual-machine-installation-vmware-workstation-player
createdAt: 2022-07-05T19:43:33.000Z
---

You can install the Belden Horizon Data Manager on a virtual machine using VMWare Workstation Player.

The virtual machine that runs Belden Horizon Data Manager uses the system time of the host environment. To ensure that timestamps of collected data are as universal as possible, we recommend setting the system time of the host environment to the UTC time zone.

A typical Belden Horizon Data Manager virtual file for ESXi deployment adheres to the following naming convention:  `<product-2.2.2>.ova`.&#x20;

Login information is as follows:

- admin
  https\://\<your-ip-address>:8446
  username: admin
  password: admin
- application
  https\://\<your-ip-address>
  username: demo
  password: demo
- key-cloak
  https\://\<your-ip-address>/auth/admin
  username: kadmin
  password: kadmin

# Before You Begin

- Configure the docker bridge network. By default, this installation allocates the subnet `172.17.0.0/16`. Make sure that this does not conflict with your host environment network configuration.

:::hint{type="success"}
**Tip**: To reconfigure the docker bridge network, please refer to this [docker guide](https://docs.docker.com/network/bridge/).
:::



- Set up proxies to access Belden Horizon Data Manager behind the company firewall.
- Install ESXi v6.7 or higher. See [VMware](https://www.vmware.com/worldwide.html) for more information.
- Obtain a valid `.ova` file from Belden.&#x20;

To use VMWare Workstation Player to install Belden Horizon Data Manager, you will need to do the following.&#x20;

- Step 1: Install the Virtual Machine (VMWare Workstation Player)
- Step 2: Launch the Virtual Machine
- Step 3: Log in to the Belden Horizon Data Manager (BHDM) UI
- Step 4: Verify Post-Installation Checklist

To jump to a specific section, refer to the Table of Contents on the right side and click the corresponding step.&#x20;

# Step 1: Install the Virtual Machine (VMWare Workstation Player)

You will first need to install the virtual machine that will run Belden Horizon Data Manager.

**To install the virtual machine:**

1\. Start the **VMWare application** (for example, VMWare Workstation 15 Player).
The Welcome to *VMware Workstation 15 Player* dialog box appears.

2\. Select **Open a Virtual Machine** from the right pane.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/j_VrN5zzCCveNOZoWRZ5R_vmware-player-open-vm.png" size="80" width="634" height="451" caption="VM Workstation panel" position="center" showCaption="true"}

3\. Select the **.ova** file from the file browser, and then click **Open**.
The *Import Virtual Machine dialog* box appears.

4\. From the *Import Virtual Machine* dialog box, do the following:
&#x20;    a. Enter the name of the virtual machine in the *Name* field.

&#x20;    b. Enter the storage folder path for which the virtual machine configuration is stored in the *Storage Path*&#x20;
&#x9; field, and then click **Import**.



::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/AknJdYaaxjWyggK7o74bU_vmware-workstation-player-import.png" size="80" width="347" height="231" caption="Import Virtual Machine  dialog box" position="center" showCaption="true"}

The *VMWare Workstation Play* creates the virtual machine.

The *Belden Horizon Data Manager* device appears in the left pane.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/1p2CsoHG1_UIEQqf9GAAY_vmware-workstation-player-success.png" size="80" width="686" height="551" caption="Selecting EdgeManager panel" position="center" showCaption="true"}

# Step 2: Launch the Virtual Machine

After installing the virtual machine, you will need to launch the virtual machine containing Belden Horizon Data Manager.

**To launch the virtual machine:**

1\. From the right pane in the *VMWare Player* application, click **Play virtual machine**.
The virtual machine starts up and displays the terminal.

:::hint{type="success"}
**Tip**:

You can change your settings using the Terminal User interface (TUI).

To log in using the Terminal window, use the following credentials:

username: `em_setup`

password: `edgemanager`
:::

2\. Note down the IP as this is required for log in.

# Step 3: Log in to the Belden Horizon Data Manager (BHDM) UI

After launching the virtual machine, you can then login to Belden Horizon Data Manager via a browser.

**To log in to LEM UI:**

1\. Open a new incognito browser window and paste the IP address into the URL field.
The application initializes, and then the *Log In&#x20;*&#x73;creen appears.

2\. Log in with the following credentials:

- Username: `demo`
- Password: `demo`

3\. Change your password to activate your account, and then click Submit.
The *Belden Horizon Data Manager* application opens.

:::hint{type="info"}
**Note**: You must change your password after the first log in.
:::

# Step 4: Verify Post-Installation Checklist

Verify the contents within the [Post-Installation Checklist](https://public-docs.litmus.io/bhdm/post-installation-checklist).

