---
title: Post-Installation Checklist
slug: bhdm/post-installation-checklist
createdAt: 2022-07-06T19:27:12.000Z
---

After installing, Belden Horizon Data Manager should be further configured. The following post-installation topics are included in this section:

- Keycloak Post-Installation Checklist
- Admin Console Post-Installation Checklist

# Keycloak Post-Installation Checklist

This checklist provides steps that should be performed to verify that the Belden Horizon Data Manager is configured as desired and works correctly.

You must verify the following using Keycloak:

- Keycloak Realm Settings
- Keycloak Clients
- Keycloak Client Scope
- Roles
- Authentication
- Default Users

## Before You Begin

Before completing the steps below, make sure you do the following:

- Install and configure the Belden Horizon Data Manager application on the same network as your devices. See [Virtual Machine Installation (ESXi)](https://public-docs.litmus.io/bhdm/virtual-machine-installation-esxi), [Virtual Machine Installation (ESXi-Hypervisor)](https://public-docs.litmus.io/bhdm/virtual-machine-installation-esxi-hypervisor), or [Virtual Machine Installation (VMWare Workstation Player)](https://public-docs.litmus.io/bhdm/virtual-machine-installation-vmware-workstation-player) for more information.
- Log in to Belden Horizon Data Manager the first time after installation.&#x20;

## Keycloak Realm Settings

**To verify the Keycloak Realm Settings:**

1\. From a browser, enter: `https://<IP address>/auth/admin`.
The log in for *Keycloak* appears.

2\. Enter the following:

- Username: `kadmin`
- Password: `kadmin`
- Click **Log In**.

The *Keycloak&#x20;*&#x61;pplication opens to the *Realm Settings*.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/WU8--csQW0jQUdC9aGbFs_keycloak-realm-settings-general.png" size="80" width="749" height="398" caption="Keycloak interface" position="center" showCaption="true"}

3\. Make sure that the General pane displays *Standalone*, the *Display Name* field displays Belden Horizon Data Manager, and the *Enabled* toggle is **On**.

4\. Click the **Keys** tab.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/fDyFUj-IAtoFvNt98OYoc_keycloak-realm-settings-keys.png" size="80" width="750" height="197" caption="Keycloak interface Keys tab" position="center" showCaption="true"}

5\. Make sure that three keys are created for the algorithms **AES**, **RS256** and **HS256**.

## Keycloak Clients

**To verify the Keycloak Clients:**

1\. From the *Navigation* pane, click **Clients**.
The *Clients* pane appears.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/6uPAi8CY8AQPYPOnjubS9_keycloak-clients.png" size="80" width="746" height="381" caption="Keycloak interface Clients pane" position="center" showCaption="true"}

2\. Verify that the following clients exist and are enabled:

- account
- admin-cli
- broker
- em-api-server
- em-api-swagger
- em-mpcs
- em-ui
- realm-management
- security-admin-console

## Keycloak Clients Scopes

**To verify the Client Scopes**:

1\. From the *Navigation* panel, click **Client Scopes**.
The *Client Scopes&#x20;*&#x70;ane appears.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/Y6_Nl_56kPCeyHx2fI1yi_keycloak-client-scopes.png" size="80" width="751" height="524" caption="Keycloak interface Clients Scopes pane" position="center" showCaption="true"}

2\. Verify that these Client Scopes exist:

- address
- email
- kproxy\_aud
- offline\_access
- phone
- profile
- role\_list
- roles
- web-origins

## Roles

**To verify Roles:**

1 From the *Navigation* pane, click **Roles**.
The *Roles* pane appears.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/dVsNRzORni2Lb_y3AjQAu_keycloak-roles.png" size="80" width="751" height="218" caption="Keycloak interface Roles pane" position="center" showCaption="true"}

2\. Verify that the following roles exist:

- offline\_access
- uma\_authorization

## Authentication

**To verify Authentication:**

1\. From the *Navigation* panel, click **Authentication**.
The *Authentication* pane appears.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/qu4qLNZO3knNg6t3kp8WJ_keycloak-authentication.png" size="80" width="752" height="249" caption="Keycloak interface Authentication pane" position="center" showCaption="true"}

2\. Verify the settings as shown:

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/u0XMzwgQjD5iB5I6fNSL3_keycloak-authentication-settings.png" size="80" width="748" height="159" caption="Keycloak interface Authentication pane finalized settings" position="center" showCaption="true"}

## Default Users

**To verify the Default Users:**

1\. From the *Navigation* panel, click **Users**.
The *Users* pane appears.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/soNTsbm3BMx1z4FaVkIpx_keycloak-users.png" size="80" width="747" height="696" caption="Keycloak interface Users pane" position="center" showCaption="true"}

2\. Click **View all users** and verify that the following users exist:

- demo

# Admin Console Post-Installation Checklist

This checklist provides steps that should be performed to verify that the Belden Horizon Data Manager is configured as desired and works correctly.

You must do the following:

- Verify the current device time
- Verify available licenses

## Before You Begin

- Make sure that you have installed and configured the Belden Horizon Data Manager application on the same network as your devices. See [Virtual Machine Installation (ESXi)](https://public-docs.litmus.io/bhdm/virtual-machine-installation-esxi), [Virtual Machine Installation (ESXi-Hypervisor)](https://public-docs.litmus.io/bhdm/virtual-machine-installation-esxi-hypervisor), or [Virtual Machine Installation (VMWare Workstation Player)](https://public-docs.litmus.io/bhdm/virtual-machine-installation-vmware-workstation-player) for more information.&#x20;
- Log in to Belden Horizon Data Manager the first time after installation.&#x20;

**To verify the current device time:**

1\. Log in to **Belden Horizon Data Manager Admin Console**.

2\. From the *Navigation* panel, select **Dashboard**.
The *Dashboard* module appears.

3\. From the *CPU section*, view the current device time.

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/ChHPLCpE6oIFFCsLTzoNH_dashboard-cpu-utilization.png" size="80" width="1583" height="297" caption="CPU utilization versus time" position="center" showCaption="true"}

:::hint{type="info"}
**Notes**:

- The current device time displays the time of the virtual host.
- Initially, no Companies, Projects, or Devices are configured.
:::

**To verify available licenses:**
1\. From the Navigation panel, select **Settings**,.
Th&#x65;*&#x20;Settings* pane appears.

2\. From the *Settings* pane, select **Licenses**.

3\. From *Licenses*' *Available Licenses* section, view the license list.
Initially, the device operates on a trial license.

:::hint{type="info"}
**Note**: Make sure to activate site license server to provision site licenses to edge devices during activation provision.
:::

